Lighter safety/care

TAKE CARE OF YOUR NAAR LIGHTER AND KEEP THE FIRE BURNING
PLAY WITH FIRE, BUT FOLLOW THE RULES
DON’T BE HOT-HEADED, READ THE SAFETY NOTICE

  • Maintenance

    To prevent scratches to your lighter from normal storage in a pocket, car console, etc. we recommend you keep your lighter in the reusable transparent packaging it comes with (or at least away from sharp items such as keys).

  • Cleaning

    Occasionally, dust or lint may clog the ignition valve, causing the lighter to malfunction. To clear obstructions such as these, blow a burst of air into the ignition valve.

  • Storing

    Before storing your lighter for a long period of time, empty all fuel by pressing on the inlet valve with a small screwdriver (hold the lighter vertically while bleeding the valve). If your lighter has not been used for a long period of time and appears to no longer be working, empty all fuel from the lighter then refuel and adjust the flame level (as mentioned in the re-felling instructions above). This should correct any problem.

  • If you have any additional questions, please contact us and one of our customer service representatives will get back to you shortly!

  • Igniting the Lighter

    Simply push down on the ignition switch of the lighter to ignite a powerful jet flame. This flame can be nearly invisible in bright light, so proper care is required.

  • Extinguishing the Flame

    Release pressure from the ignition switch of the lighter to immediately extinguish the flame by stopping fuel flow.

  • Important Safety Measure

    Take care not to touch the lighter’s metal top after ignition. To avoid heat buildup, do not use in any situation that would require a continuous flame for more than 10 seconds. The lighter’s metal top may become too hot and cause harm to the user and/or the lighter.

  • Refilling your NAAR Lighter

    Instructions: To refill, flip your NAAR lighter in an upside-down position and insert the butane tank tip vertically downwards on the lighter’s refill valve. Press down firmly for about 5 seconds. Once refilled, allow around 2mins for the gas to reach room temperature and slide the flame regulator from high to low, then back to middle. Premium butane gas is highly recommended, as lower quality butane has been known to clog lighters

  • If you have any additional questions, please contact us and one of our customer service representatives will get back to you shortly!

  • Notice

    Lighters contain flammable gas under pressure; handle carefully. Ensure that flame is extinguished before attempting to fill and never attempt to ignite lighter while refilling. Only refill in a well-ventilated area and hold lighter away from face and clothing while filing. Never fill lighters around any heat source, spark or flame.

  • If you have any additional questions, please contact us and one of our customer service representatives will get back to you shortly!
Contact Us
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?
Questions?